5- 44 NetWare Settings (Windows)トップChapter 3Printing by ObjectiveChapter 4MaintenanceChapter 5Using the Printerin a NetworkEnvironmentChapter 6TroubleshootingChapter 7Operating theFunction MenuIndexTOPContentsChapter 2Using Various MediaChapter 1Basic UseConfiguring the Computer for NetWarePerform these settings on each computer after you haveselected the NetWare print service and protocol. Connecting to a NetWare NetworkInstall the NetWare client software on all computers thatwill perform printing, and the log onto either the NetWareserver or the tree. Refer to the NetWare manual or theOS manual for the connection methods. Installing the Printer DriverTo perform printing, the printer driver must be installed.Install the driver according to directions from yournetwork administrator.When you install the printer driver, be sure to selectNetwork printer and select the print queue that youcreated with the NetWare print service settings. Setting the Printer PortSelect Settings and then Printers from the Start menu,and then select the printer icon. Next, select Propertiesfrom the File menu. Select the Advanced sheet or thePorts sheet, and then set the print queue that createdthe print destination port using the NetWare print servicesettings. (→ P.5-37)Notez This procedure is not required if you set the connectiondestination of the printer during the installation of theprinter driver.
