1- 3 Printer Part NamesTOPChapter 3Printing by ObjectiveChapter 4MaintenanceChapter 5Using the Printerin a NetworkEnvironmentChapter 6TroubleshootingChapter 7Operating theFunction MenuIndexContentsChapter 2Using Various MediaChapter 1Basic Usem Maintenance CartridgeThe cartridge that vacuums and collects excess ink.Replace the maintenance cartridge when a messageappears prompting you to replace the cartridge.(→ P.4-14)n Moving HandlesGrasp the handles provided on the base of the printer tolift or move the printer.o Maintenance Cartridge CoverOpen this cover to replace the maintenance cartridge.(→ P.4-14)p StandThis is a table designed specially for this printer. Castersare attached to the legs to make it easy to move. Anoptional Media Take-up Unit can also be installed.q StopperThe part that locks the casters of the printer stand. Back Viewa Moving HandlesGrasp the moving handles provided on the base of theprinter to lift or move the printer.b Expansion Board SlotsProvided for installing a network interface board orIEEE1394 expansion board. Remove the two screws toinsert the board. (→Quick Start Guide)Printers sold in the U.S.A. are shipped with the Networkboard installed as a standard item (not an option).c USB PortThis is the communication port for USB High Speed 2.0.Connect the USB cable here to connect the printer to thecomputer via USB. (→Quick Start Guide)d Accessory PocketHolds the printer manual, tools for assembly, and extraink tanks.e Power Supply ConnectorProvides a connection point for the printer power cord.abcde
