5- 48 List of Network SettingsトップChapter 3Printing by ObjectiveChapter 4MaintenanceChapter 5Using the Printerin a NetworkEnvironmentChapter 6TroubleshootingChapter 7Operating theFunction MenuIndexTOPContentsChapter 2Using Various MediaChapter 1Basic UseList of Network SettingsIf you are using a web browser (Remote UI), you canchange the network interface settings. The settings that canbe changed are described below. General Settings TCP/IP SettingsItem Content Initial ValueDevice Name Device Name(Range: 0 to 32 chars.) BlankLocation Device location(Range: 0 to 32 chars.) BlankAdministratorName of Administrator forthe device(Range: 0 to 32 chars.)BlankPhoneTelephone number of theAdministrator(Range: 0 to 32 chars.)BlankComment(E-mail)Administrator Comments(Range: 0 to 32 chars.) BlankAdministratorPasswordDevice password(Range: 0 to 15 chars.) BlankItem Content Initial ValueSet the AddressUsing DHCPDetermines whether DHCPis used to configure the IPaddressOffSet the AddressUsing BOOTPDetermines whetherBOOTP is used to configurethe IP addressOffSet the AddressUsing RARPDetermines whether RARPis used to configure the IPaddressOffRAW Mode Bi-directionalCommunicationFunctionDetermines whether bi-directional communicationis used for RAW mode.OffPerformsDynamic Updateof DNSDetermines Whether DNSServer Registration Updateis Automatic.OffUsing theZeroconfFunctionDetermines whetherZeroconf is used. OnIP Address The IP address of the printer 0.0.0.0Subnet Mask The subnet mask of the printer 0.0.0.0GatewayAddressThe gateway address of theprinter. 0.0.0.0Primary DNSServer AddressIP address of the primaryDNS server 0.0.0.0Secondary DNSServer AddressIP address of the secondaryDNS server. 0.0.0.0
