5- 49 List of Network SettingsトップChapter 3Printing by ObjectiveChapter 4MaintenanceChapter 5Using the Printerin a NetworkEnvironmentChapter 6TroubleshootingChapter 7Operating theFunction MenuIndexTOPContentsChapter 2Using Various MediaChapter 1Basic Use AppleTalk Settings NetWare SettingsDNS Host Name Printer Host Name(Range: 1 to 63 chars.)NB-15FBxxxxxxxxxxxxDNS DomainNamePrinter Domain Name(Range: 0 to 64 chars.) BlankMulticast DNSService NamePrinter Multicast DNSServer Name(Range: 1 to 63 chars.)CanonW8400PG(xxxxxx)Item Content Initial ValuePhase TypePhase type in use(determines whetherAppleTalk is used.)OffNameThe names of the printersdisplayed in the Chooser orprinter utility (Printer Center)(Name length: 1 to 31 chars.)CanonNB-15FB(xxxxxx)Zone The name of the printerzone (1 to 31 chars.) ＊Item Content Initial ValueItem Content Initial ValueFrame Type The frame type used byNetWare. OffNCP Burst ModeDetermines whether NCPburst mode is used. (Normally,leave this setting on.)OnPrint ServiceThe print service to use.(Only one print service canbe selected and enabled.)NDSPServerPacketSignatureDetermines whether or notto use packet signatures(Normally leave set to IfRequested by Server)IfRequestedby ServerBindery PServerFile ServerNameName of the NetWare fileserver of the NetWare printserver. (Range: 0 to 47 chars.)BlankPrint ServerNameThe name of the NetWareprint server in use.(Range: 0 to 47 chars.)BlankPrint ServerPasswordThe password required bythe print server setting.(0 to 20 chars.)BlankPolling IntervalThe time interval betweenjob confirmations.(Range: 1 to 15 sec.)5
