1- 2 Printer Part NamesTOPChapter 3Printing by ObjectiveChapter 4MaintenanceChapter 5Using the Printerin a NetworkEnvironmentChapter 6TroubleshootingChapter 7Operating theFunction MenuIndexContentsChapter 2Using Various MediaChapter 1Basic UsePrinter Part NamesPrinter Main Unit Front Viewa Top CoverRemove this cover to install the printhead, to load media,or to remove sheets of paper jammed in the printer. (→P.4-11, P.6-37)b Cutter GroovesIf cutting paper manually, make sure the cutter is incontact with this wall at all times.c Ejection GuidePrinted media is delivered to the paper catch tray. Openthe ejection guide to load the roll media.d Roll Holder SlotThis groove guides the roll holder. (→ P.2-31)e Holder StopperThe part that fastens the roll media to the roll holder.(→ P.2-28)f Spool Prevention StayThis part prevents printed matter from being snagged onthe roll holder or paper feed slot.g Output stacker (provided with optional stand)A cloth tray that catches print media ejected from theprinter.h Paper Feed SlotInsert paper here when loading roll media. (→ P.2-28)i Roll HolderThe holder where the roll media is loaded. (→ P.2-28)j Right Back CoverOpen to replace ink tanks.k Operation PanelProvides the display panel and the operation panelbuttons. For more details, please refer to “Using theOperation Panel Buttons”. (→ P.1-12)l Release LeverThe lever that releases the media. If you are loading ormanually feeding paper, pull up this lever and open thepaperweight bar. (→ P.2-32)jkmlonpqabcdefghi
