5- 37 NetWare Settings (Windows)トップChapter 3Printing by ObjectiveChapter 4MaintenanceChapter 5Using the Printerin a NetworkEnvironmentChapter 6TroubleshootingChapter 7Operating theFunction MenuIndexTOPContentsChapter 2Using Various MediaChapter 1Basic UseSetting Up a NetWare Print ServiceTo print using a NetWare network, print services such asprint servers, queues, etc., need to be setup. The printservice settings can be made from the computer you areusing with the following software. Use the software that iseasiest for you.z NWADMIN or PCONSOLE (Novell softwareapplications provided with NetWare)Importantz If you configure the print service settings usingNWADMIN, Novell Client (the Novell NetWare client)must be installed as the client software application.z This section describes an example of the configurationprocedure using NetWare print service. Theconfiguration procedure may change depending on theenvironment you are using. Types of Print ServicesBefore performing the print service settings, be sure toread the description below then select the printer servicetype.Notez With NetWare 5.1J/6.0, NDPS can also be used as theprint service. If using NDPS, use the Novell printergateway, which is bundled with NetWare. This manualdoes not explain how to setup NDPS, so refer to theNetWare manual.z NDS (Novell Directory Service) and BinderyBoth NDS and bindery are supported. Selectwhichever mode is compatible with your networkenvironment.z Queue Server Mode and Remote Printer ModeBoth Queue Server Mode and Remote Printer Modeare supported.z Queue Server ModeIf you are using queue server mode, all print serverfunctions are supported, so there is no need foradditional print server hardware or software. In NDSqueue server mode (NDS PServer), printing isperformed using the NDS print server. In binderyqueue server mode (Binery PServer), printing isperformed using the bindery print server.Further, in queue server mode, a NetWare user licenseis required for each network interface used.z Remote Printer ModeIf using remote printer mode, the printer is controlledby the NetWare print server. Consequently, a NetWareprint server is required. In NDS remote printer mode(NPrinter), printing is performed using the NDS printserver, and in bindery remote printer mode (RPrinter),printing is performed using the bindery print server.
