Canon imagePROGRAF W8400 User Manual

Also see for imagePROGRAF W8400: Brochure & specs Guide Brochure & specs Driver guide Brochure & specs

Contents

Canon imagePROGRAF W8400 User Manual Manual pdf 44 page image

1- 41 PrintingTOPChapter 3Printing by ObjectiveChapter 4MaintenanceChapter 5Using the Printerin a NetworkEnvironmentChapter 6TroubleshootingChapter 7Operating theFunction MenuIndexContentsChapter 2Using Various MediaChapter 1Basic UseImportantz If the printer is connected to a network, make sure thatActive is selected for AppleTalk.z The AppleTalk setting on network interface card usedwith this printer is disabled when the card is shipped.On the printer operation panel, select Interface Setup,then select AppleTalk, and then select On. (→ P.5-30)z For an IP print connection, register the IP addressunder Registering IP Address... and then select thename of the printer under IP Print.3 Close the Chooser window and click the OKbutton in the message window.This completes the selection of the printer.z Mac OS XIf you are using Mac OS X, use the Printer Setup Utilityto select the printer from the Print Center. This printer willnot be displayed in the list if it is not switched on, or if theprinter cable is disconnected. Start the print job after youconfirm that the printer is in working order.The example here describes Mac OS X Ver. 10.3. Theicon name and graphic may be different for otherversions.1 Select Finder, then select Utilities orApplications from the Go menu.2 Open the Utilities folder then open PrinterSetup Utility.