5- 10 TCP/IP Network Settings (Windows, Macintosh, UNIX)トップChapter 3Printing by ObjectiveChapter 4MaintenanceChapter 5Using the Printerin a NetworkEnvironmentChapter 6TroubleshootingChapter 7Operating theFunction MenuIndexTOPContentsChapter 2Using Various MediaChapter 1Basic Use Configuring the Printer Using the ARP/PING CommandThe printer MAC address is required to configure theprinter using the ARP/PING command. The MACaddress can be determined by a status print, from thesticker on the internal printer network card, or from theInformation menu on the operation panel.z Checking the Printer MAC AddressTo find the MAC address using the Status Print, use thefollowing procedure to print the status print. Load rollmedia of A3 size or greater before printing.Notez The MAC address can be found on the sticker on theinternal print network card, or by pressing the Onlinebutton in the printer operation panel and selectingMAIN MENU, Information, and then MAC Address.1 If the printer power is off, press the Powerbutton to switch the printer on.After a few moments, Online appears in the display.2 Press the Online button to display MAINMENU.3 Press [] or [] to select Test Print thenpress [].4 Press [] or [] to select Status Print, thenpress OK button.The printer settings information will be printed. Whenprinting has finished, Online is displayed and theprinter is ready to print.DataInformation PowerOfflineMenuMessageOnlineCleaning(3 sec.)Stop/Eject(1 sec.)MAIN MENUTest Print ↓Test PrintStatus PrintMAIN MENUHead CleaningOnlineCleaning(3 sec.)Stop/Eject(1 sec.)
