Canon imagePROGRAF W8400 User Manual

Also see for imagePROGRAF W8400: Brochure & specs Guide Brochure & specs Driver guide Brochure & specs

Contents

Canon imagePROGRAF W8400 User Manual Manual pdf 105 page image

2- 44 Change the height of the printheadTOPChapter 3Printing by ObjectiveChapter 4MaintenanceChapter 5Using the Printerin a NetworkEnvironmentChapter 6TroubleshootingChapter 7Operating theFunction MenuIndexContentsChapter 2Using Various MediaChapter 1Basic Use4 Open the top cover when you see OpenUpperCover, then Chng Head Hght isdisplayed.Importantz Do not touch any areas other than those indicated.Your hands could get dirty or this could damage theprinter.z If the printhead height adjustment lever is dirty, beforecontinuing with this procedure, wring out a damp clothand use it to clean the printhead height adjustmentlever.5 Adjust the height of the printhead with theprinthead height adjustment lever.If printing on CAD standard paper, CAD tracingpaper, or CAD translucent matte film, set the lever tothe down position (a). If printing on semi-glossycanvas, set the lever to the up position (c), and ifprinting any other type of media, set the lever to themiddle (standard) position (b). If the printhead ismisaligned, or if printing on paper that creaseseasily, set the printhead higher than the optimumprinthead height for each media type.6 Close the top cover.The carrige returns to the home when you seeCarriage Moving. The printer returns to the printready status.cba