Panasonic PN28248 Operation Manual

Also see for PN28248: Operation manual for cli

Contents

Panasonic PN28248 Operation Manual Manual pdf 95 page image

95Available commands are listed below.N Display the next page.Press "N" to display the next page.P Display the previous page.Press "P" to display the previous page.V Configure the PVID settings.1. Press "V." The command prompt changes to "Enter port number>." Enter the port num-ber you wish to configure.2. Then, the command prompt changes to "Enter PVID for port #>." Enter the VLAN ID youwish to modify among the VLAN IDs already configured.F Set the type of packets to be received.1. Press "F." The command prompt changes to "Enter port number>." Enter the port num-ber you wish to configure.2. Then, the command prompt changes to "Select port acceptable frame type (A/T)>."Enter "A" to receive all the frames or "T" to receive only the tagged frames.Q Return to the parent menu.Note: This Switching Hub can assign multiple VLANs to one port. When a new VLANwas configured, it belongs to both VLAN to which it has belonged and thenew VLAN. So, when you divide the domain, make sure to delete it from theVLAN to which it has belonged.