120Available commands are listed below.N Display the next page.Press "N" to display the next page.P Display the previous page.Press "P" to display the previous page.D Enable/disable the unknown unicast storm control.1. Press "D." The command prompt changes to "Enter port number>." Enter the port num-ber you wish to specify.2. Then, the command prompt changes to "Enable or Disable DLF storm control status (E/D)>." Press "E" to enable the unknown unicast storm control. Press "D" to disable it.B Enable/disable the broadcast storm control.1. Press "B." The command prompt changes to "Enter port number>." Enter the port num-ber you wish to specify.2. Then, the command prompt changes to "Enable or Disable broadcast storm control sta-tus (E/D)>." Press "E" to enable the broadcast storm control. Press "D" to disable it.M Enable/disable the multicast storm control.1. Press "M." The command prompt changes to "Enter port number>." Enter the port num-ber you wish to specify.2. Then, the command prompt changes to "Enable or Disable multicast storm control status(E/D)>." Press "E" to enable the multicast storm control. Press "D" to disable it.T Set the threshold of the number of packets (Packet Per Second).1. Press "T." The command prompt changes to "Enter port number>." Enter the port num-ber you wish to specify.2. Then, the command prompt changes to "Enter threshold value>." Enter the threshold ofthe number of packets (Packet Per Second) between 0 and 262143.Q Return to the parent menu.
