671. Basic operationsThe data is stored in the following folders on the memory card.When data is to be loaded, first store the data in the respective folders, and then load the files.Data type SELECT item Storage folder ExtensionVideo memoryStill image data*1Still1, Still2 “HS400\IMAGE” bmp, jpg, tga, tif, gif, pngVideo memoryMoving image dataClip1, Clip2 “HS410\CLIP” clpShot memory data Shot “HS410\SHOT” s41Event memory data Event “HS410\EVENT” e41Setup data Set Up “HS410\SYSTEM” h41All file All “HS410\ALL” — *2Plug-in software Plug-in “HS410\PLUGIN” plgSoftware for upgrading Upgrade “HS410\SYSTEM” 41dLog file Log “HS410\LOG” log*1: When the still image data with key signals attached is stored into the video memory, select “tga” or “png” as the file format.The still image data of any other file format cannot be stored with attaching the key signals.*2: In the case of “All file”, folders with the names specified using the File Name item are created at the hierarchical level under the “ALL”folder, and the data is stored inside the folders which have been created.The data is stored under the following filenames.Still1.***, Still2.***, Clip1.clp, Clip2.clp, Shot.s41, Event.e41, Setup.h41Memory card handling precautions Do NOT eject the memory card while the memory card access LED is lit.When an memory card is ejected while the memory card access LED is lit, the transition may be temporarily suspended.In addition, the data stored on the memory card may be lost. The data stored on memory cards may be lost as a result of misplacing the cards or performing erroneous operations, forinstance. It is recommended that valuable data be stored on a computer or other device.
