531. Basic operationsSetting the playback methodw Setting the playback mode1 Press the [EVENT MEM] button and light its indicator.4INSDISPLAY MENU SELECTMENUINPUTVMEMBKGDPATTKEYPATTTAKEENTER� / +PAGEPLAYRECSTOPXPTDSBL＜CLIP 1STILL 1MEMORY / WIPE PATTERN / 10 KEY＜＜ TRIM OFF＞＞CLIP 2STILL 2REVTRIM OUTTRIM IN9PASTE6MOD3REVCUNDO8COPY5DEL2＞.＞＞7NEW1＜0/10＜＜STORERECALLEDITDELSHOTMEMEVENTMEMPLUGINMEM1PLUGINMEM2＞[EVENT MEM] button2 Press the [EDIT] button to establish the editing mode.3 Press the e button to display the Event Memorymenu.4 Use [F1] to display the Play sub menu.5 Use [F2] to set the playback mode using the Play Modeitem.Once During normal playback, playback stopsat the last event, and if the [TAKE ENTER]button is now pressed, the images are playedback in the same direction.During reverse playback, playback stopsat the first event, and if the [TAKE ENTER]button is now pressed, the images are playedback in the same direction.Loop During normal playback, playback returnsinstantly from the last event to the first event,and what has been played back is repeated.During reverse playback, playback returnsinstantly from the first event to the last event,and what has been played back is repeated.w Setting the display mode1 Press the e button to display the Event Memorymenu.2 Use [F1] to display the Timeline sub menu.3 Use [F2] to set the timeline display mode using the Viewitem.Normal The timeline is displayed in a size which isone-half of the width of the built-in displayscreen.Wide The timeline is displayed in the full size(as large as the entire width) of the built-indisplay screen.
