Panasonic PN28248 Operation Manual

Also see for PN28248: Operation manual for cli

Contents

Panasonic PN28248 Operation Manual Manual pdf 64 page image

64F Set Facility.1. Press "F." The command prompt changes to "Enter manager entry number>." Enter a num-ber you wish to set.2. Then, the command prompt changes to "Enter Server Facility>." Enter a value of 0 to 7(Local0 to Local7).I Set the IP address of the Syslog server.1. Press "I." The command prompt changes to "Enter manager entry number>." Enter a num-ber you wish to set.2. Then, the command prompt changes to "Enter IP address for manager>." Enter the IPaddress of the Syslog server.Y Set information that is added to the system log to be transmitted.1. Press "Y." The command prompt changes to "Enter manager entry number>." Enter a num-ber you wish to set.2. Then, the command prompt changes to "Enter Include Information>." Enter "S" to add theSysName of this Switching Hub, "I" to add the IP address, or "N" not to add the IP address.C Delete setting information of Syslog Transmission.1. Press "C." The command prompt changes to "Enter manager entry number>." Enter a num-ber you wish to delete.2. Then, the command prompt changes to "Clear Syslog Server information>." Enter "Y" todelete the server information. Enter "N" not to delete it.Q Return to the parent menu.