56Screen DescriptionConsole UI IdleTime Out:Displays the idle timeout settings (in minutes) for terminating a console-con-nected session if no input is made. The factory default setting is 5 minutes.Telnet UI IdleTime Out:Displays the idle timeout settings (in minutes) for terminating a Telnet-connectedsession if no input is made.The factory default setting is 5 minutes.Telnet Server: Displays the Telnet access settings."Enabled" is the factory default setting.Enabled: Access is enabled.Disabled: Access is disabled.SNMP Agent: Displays the SNMP access settings."Disabled" is the factory default setting.Enabled: Access is enabled.Disabled: Access is disabled.Web Server Sta-tus:Displays whether access by the Web browser is enabled or disabled."Disabled" is the factory default setting.Enabled: Access is enabled.Disabled: Access is disabled.IP Setup Inter-face:Displays the access settings for the Web browser."Disabled" is the factory default setting.Enabled: Access is enabled.Disabled: Access is disabled.Local UserName:Displays the current login username."manager" is the factory default setting.Syslog Transmis-sion:Displays the settings for sending system logs to the Syslog server."Disabled" is the factory default setting.Enabled: Sends system logs to the Syslog server.Disabled: Does not send system logs to the Syslog server.Login Method:1/2Displays how to check the username and password for login.The factory default setting is "Local" for 1 and "None" for 2.Local Login with the username and password set for this SwitchingHub.RADIUS Login with authentication from the RADIUS server.None Not used. (Only Login Method 2 can be configured.)
