49Screen DescriptionPort Displays the port number.Trunk Displays the group number for a trunked port.Type Displays the port type.1000T The port type is 10/100/1000BASE-T.1000X The port type is 1000BASE-X (SFP port).Admin Displays the current port status. For all ports, "Enabled" is the factory default setting.Enabled The port is available.Disabled The port is not available.Link Displays the current link status.Up A link has been established successfully.Down A link has not been established.Mode Displays the communication speed and full-duplex/half-duplex settings.For all ports, "Auto" is the factory default setting.Auto Auto negotiation mode100-FDx(100F) 100 Mbps full-duplex100-HDx(100H) 100 Mbps half-duplex10-FDx(10F) 10 Mbps full-duplex10-HDx(10H) 10 Mbps half-duplexFlow Ctrl Displays the flow control settings.For all ports, "Disabled" is the factory default setting.Enabled The flow control is enabled.Disabled The flow control is disabled.Auto-MDI Displays the Auto MDI/MDI-X function settings. Ports 1 to 24 are set to "Disabled,"and Ports 25 to 26 are set to "Enabled" at factory default setting.Enabled The Auto-MDI/MDI-X function is enabled.Disabled The Auto-MDI/MDI-X function is disabled.
