Panasonic PN28248 Operation Manual

Also see for PN28248: Operation manual for cli

Contents

Panasonic PN28248 Operation Manual Manual pdf 46 page image

46Screen DescriptionSNMP Authenti-cation Failure:Displays the trap sending settings for an SNMP authentication failure.Enabled Enables the trap sending.Disabled Disables the trap sending. (Factory default setting)Enabled LinkUp/Down Port:Displays the port number to which a trap is sent, when its link status changes.All ports are assigned in factory default setting.PoE Trap Con-trol:Displays the PoE trap control settings.Enabled Enables the trap sending. (Factory default setting)Disabled Disables the trap sending.TemperatureTrap Control:Displays the trap sending settings when the internal temperature is above orbelow the preset temperature.Enabled Enables the trap sending.Disabled Disables the trap sending. (Factory default setting)TemperatureThreshold:Displays the threshold temperature value to send the trap.The factory default setting is 67 degrees C.FAN Failure: Displays the trap sending settings for an internal fan failure.Enabled Enables the trap sending. (Factory default setting)Disabled Disables the trap sending.