Panasonic PN28248 Operation Manual

Also see for PN28248: Operation manual for cli

Contents

Panasonic PN28248 Operation Manual Manual pdf 37 page image

37Screen DescriptionDescription Displays the system information. This item is not editable.Object ID Displays the ID, corresponding to MIB. This item is not editable.Name Displays the system name. The factory default setting is blank.Location Displays the device installation location. The factory default setting is blank.Contact Displays the contact information. The factory default setting is blank.Available commands are listed below.N Set/edit the system name.Press "N." The command prompt changes to "Enter system name>." Enter a Switching Hubname in 50 characters or less.L Set/edit the device installation location information.Press "L." The command prompt changes to "Enter system location>." Enter a SwitchingHub location in 50 characters or less.C Set/edit the contact information.Press "C." The command prompt changes to "Enter system contact>." Enter contactinformation in 50 characters or less.Q Return to the parent menu.