Panasonic PN28248 Operation Manual

Also see for PN28248: Operation manual for cli

Contents

Panasonic PN28248 Operation Manual Manual pdf 28 page image

28On the login screen, similar to Figure 4-1 or Figure 4-2, enter the login name. TheSwitching Hub's default login name is set to "manager". Enter "manager" and pressthe Return key. Then, you need to enter a password, as Figure 4-3 displays. TheSwitching Hub's default password is the same as the login name ("manager").Enter the password correctly and press the Return key.==============================================================================PN28248 Local Management System Version x.x.x.xxMAC Address: xx:xx:xx:xx:xx:xx==============================================================================Login MenuLogin: managerPassword: *******Figure 4-3 Entering passwordBoth the login name and password can be changed. For the detailed change pro-cedure, refer to Section 4.5.7.Note: When entered, the password is displayed in asterisks(*).Note: Up to four users for Telnet or up to two users for SSH can access the Switch-ing Hub concurrently.Note: For the SSH login method, follow the operating procedures for each SSH cli-ent.