133Screen DescriptionAdmin Displays whether or not power supply is possible.The factory default setting is "Up."Up Power supply is possible.Down Power supply is not possible.Sche. Displays the PoE scheduler function status.ON Indicates that the power supply to the PoE is turned on by the PoEscheduler.OFF Indicates that the power supply to the PoE is turned off by the PoEscheduler.- Indicates that the PoE scheduler is not operating.Status Displays the power supply status.Pwr Power is supplied.NotPwr Power is not supplied.Over Power supply is stopped because the power request exceeds thelimit.Layer Displays the classification methods supported by the terminal device.1 Power is supplied based on Physical Layer Classification.2 Power is supplied based on Data Link Layer Classification.Class Displays the class selected by the Classification function.Prio. Displays the priority of power supply.Crit. Indicates the highest priority.High Indicates the second highest priority.Low Indicates no priority.Limit Displays the upper limit of power supply amount. (in units of 200 mW)"Auto" is the factory default setting.Pow. Displays the amount of power supply. (in units of 100 mW)Vol. Displays the voltage. (in units of 1 V)Cur. Displays the current. (in units of 1 mA)
