122Screen DescriptionNAS ID: Displays the authentication ID (NAS Identifier).Port No: Displays the port number.Port Status: Displays the authentication status. Reflects the Port Control setting shownbelow.Unauthorized The port is not authorized.Authorized The port is authorized.Port Control: Displays the operation mode for authentication requests.Auto The access control function is enabled. The authentica-tion process relay is performed between the client andthe authentication server.Force Unauthorized The access control function is disabled. All communica-tions are blocked.Force Authorized The access control function is disabled. All communica-tions are authorized.(Factory default setting)TransmissionPeriod:The number of seconds to wait before requesting the client to reattemptauthentication.The factory default setting is 30 seconds.Supplicant Time-out:Displays the timeout for the client.The factory default setting is 30 seconds.Server Timeout: Displays the timeout for the authentication server. The factory default setting is30 seconds.MaximumRequest:The maximum number of times of retransmitting an authentication request.The factory default setting is 2.Quiet Period: Displays the number of seconds to wait before reattempting a failed authenti-cation.The factory default setting is 60 seconds.Re-authenticationPeriod:Displays the re-authentication time interval. The factory default setting is 3600seconds.Re-authenticationStatus:Displays whether the re-authentication is enabled or disabled.Enabled The re-authentication is performedDisabled The re-authentication is not performed. (Factory defaultsetting)Re-authenticationTimer Mode:Displays whether the machine using the value of re-authentication timerRADIUS The re-authentication is performed using the value ofthe Re-authentication timer on the Radius server.Local The re-authentication is performed using the value ofthe Re-authentication timer on this Switching Hub.
