Chapter 1515-2415.4 Jam Codes15.4.1 Jam Code (Printer Unit) 0012-4835imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+1. Type of JamT-15-82. Jam Code (Printer Unit)T-15-9Indicates that memory image area is full. Delete the error documents or unnecessary documents to increase availablememory.Indicates that machine failed to save the document as the document numberwithin the specified Box exceeds 1500.Delete the document in the specified Box.# 852Indicates that an error occurred as the main power switch was turned OFF duringjob execution. Check if the main power switch is ON, and then if required, repeat the job.# 853Indicates that the machine failed to execute jobs including printing huge amountof pages by printer due to insufficient resources.Decrease the volume of document to print or execute the job again when there isno other booked print job.Indicates that the machine failed to execute job during transmission of print datafrom PC to the machine due to cancellation from the printer driver.Repeat the job again.Indicates that not all the reception data from the host were spooled due toinsufficient reception data spool area when the spool function is activated.Deactivate the spool function and then transmit the job again.Indicates that the reception data volume exceeded the upper limit reception dataprocessing.Repeat the print after all the job is completed. If that is not effective, check thetransmission data.Indicates that secure jobs of which amount is more than available at one time wereintroduced.Execute or delete the secure job accumulated in the Host machine and thenexecute the job again.#854Indicates that the machine failed to deliver the device information from devicesother than same model group as the setting in 'System Administration Settings(Initial Setup/Registration) > Device Information Delivery Settings > ReceptionLimit by Delivery Group' is enabled.Deactivate the 'reception limit of the delivery group' and then repeat the deviceinformation transmission.#855Indicates that the machine failed to deliver the device information as it includeda language not available in the external phone (destination)Contact the Service.#856Indicates that the job was cancelled due to insufficient hard disk area fortemporarily stored data.Contact the system administrator.# 995Indicates that the job was cancelled due to security error. Contact the system administrator.Code Type of Jam01xx Delay jam02xx Stationary jam0Axx Residual jam0B00 Door open jamCode Type of Sensor Sensor No. Remarksxx01 Cassette 1 pickup sensor PS28xx02 Cassette 2 pickup sensor PS34xx03 Cassette 3 pickup sensor PS41Cause Remedy
