Chapter 55-17F-5-405.4.3.2 Scanner Parts Replacement Procedure(imagePRESS C1 Series/imagePRESS C7000 Series)0014-1999imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1+Parts:CCD unit / copyboard glass / scanning lamp / standard white plate / inverterPCBProcedureExecute the following Service Modes:1) COPIER > ADJUST > CCD > W-PLT-XCOPIER > ADJUST > CCD > W-PLT-YCOPIER > ADJUST > CCD > W-PLT-Z(Enter the white level data for the white plate)5.4.4 Exposure Lamp5.4.4.1 Preparation for Removing the Scanner Lamp(imagePRESS C1 Series/imagePRESS C7000 Series)0013-9945imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1+1) Removing the copyboard glass. (page 5-16)Reference [Removing theCopyboard Glass]5.4.4.2 Removing the Scanner Lamp (imagePRESS C1Series) 0013-9946imagePRESS C1 / Color Image Reader-H11) Open the toner replacement cover [1].F-5-412) Detach the hopper upper cover [1] in the direction shown by the arrow.- 2 screws [2]- 2 claws [3]F-5-423) Close the toner replacement cover.4) Detach the reader front cover [1].- 2 screws [2]- 2 magnet catches [3]F-5-435) Detach the reader rear cover [1].- 1 connector [2]- 5 screws [3]F-5-446) Detach the reader rear upper cover [1].- 1 screw [2]- 1 embossed section [3][1][2][2][1][1][2][3][1][2][2][3][3][1][2][3]
