Chapter 22-41F-2-866) Push the 2 developing assembly fixed arms [1] in the direction of [A], setthem in the direction of [B] to fix.- 2 screws [2]F-2-87F-2-882.2.13 Mounting the Developing Assembly 0012-9754imagePRESS C1 P / imagePRESS C11) Take out the developing assembly (Yellow, Magenta, Cyan, and Black)from the attached packing box.2) Hold the gear at the developing assembly [1], and manually turn the de-veloping rotary [2] counterclockwise, then with the installed color up-ward, fix [A] and [B] aligned as instructed in the figure.[1][2][3][1][A] [A][B] [B][1][2] [2]MEMO:When touching the developing assembly, check to make sure that yourhands are free of foreign matter (especially metal pieces), then start thework. (If there is foreign matter on your hand, it may cause image fault.)The developing positioning sheet for each color is attached to [A] of therespective developing rotary. Attach the developing assembly according toeach positioning sheet.If turning the developing rotary clockwise while the developing assembly isfitted, the toner blocking sheet which is attached to the sleeve of thedeveloping assembly may come off because of intervention with thephotosensitive drum. The developing rotary must be turnedcounterclockwise.CKMY[A]
