Chapter 99-29.1.2 Major Components (Section) 0012-0961imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+F-9-1Construction Characteristics/Function/Method Remarks[1] Fixing roller Fixing of toner onto the sheetimproved gross evenness80 mm dia[2] Fixing belt width: 348+/-2mm[3] outside heating roller prevents the temperature decline at continuous printing 36 mm dia[4] Separation roller separates of paper from the fixing roller 21 mm dia[5] Steering roller Corrects the belt displacement[6] Inlet roller Controls the temperature of the fixing belt 20 mm dia[7] Oil applying roller Decreases the friction of sliding surfaces inside the belt includes silicon oil; 10 mm dia[8] Collecting roller Collects the toner on the fixing roller temporarily[9] Pressure pad Forms an appropriate fixing nip[10] Outside heating cleaning roller Cleans the outside heating roller[11] Cleaning web Cleans the fixing roller via collecting roller[12] Web roller Cleans the toner attached on the collecting roller[13] Fixing inlet guide Determines the advancing angle into the fixing nip area (prevents end platespring, crease, and friction)[14] Fixing main heater (H1) Halogen heater: 400W (100V/120V), 437W (230V) main heater/sub heater; integrated typeFixing main heater (H2) Halogen heater: 400W (100V/120V), 437W (230V)[15] Inlet heater (H3) Halogen heater: 400W (100V/120V), 437W (230V)[16] Outside heater (H4) Halogen heater: 400W (100V/120V), 437W (230V)[17] Fixing refresh roller Refreshes the surface of the fixing roller[18] Upper separation guide Guides paper to the inside delivery area[19] Lower separation claw Separates paper from the fixing belt[1][6][5][7][2][9][4][8][3][13][15][12][18][19][11][16][17][14][10]
