Chapter 11-312. Paper Type Management SettingsThis feature enables to print with most optimal printing characteristics for each paper type by registering the characteristics of each paper type in the printer engine.Furthermore, parameters such as for curl correction and image position control can be changed for each paper type.This setting can be found in the following menu tree of the panel setting display.- Initial Setup / Save key > System Control Settings > Paper Type Management SettingsThe details of each setting are shown in the following table.T-1-23*1: This item is displayed by executing service mode (COPIER > OPTION > BODY > IMAG-ADJ)1.2.4 User Maintenance1.2.4.1 Cleaning 0012-2514imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+It is important to keep the machine clean so that its performance may be maintained at a specific level.Advise the user to clean the following parts on a periodical basis (about once a month).1. Copyboard Glass/Original Feed BeltClean the copyboard glass [1] and the original feed belt [2] with a cloth moistened with water or solution of mild detergent (well-wrung); then, dry wipe themwith a soft, dry cloth.Display Item Settings Purpose Remedy Service ModeDefault display Name Enter any name.Default display Category Editing prohibited (standard/custom)Default display Grammage 64 to 256 g / m2 To register the thickness of thepaper.Default display Type Normal* / Index paper /Punched paperTo register the style of thepaper.Default display Surface property High-quality paper / recyclepaper / coated paper (one-side)/ coated paper (both-sides) /embossed paper / vellum paper/ film / label / cotton paperTo register the type of thepaper.Default display Creep (Displacement)Correct.0.00* to 2.00 mm To control the degree ofdisplacement for each type ofpaper when printeddocuments are bound up bythe saddle stitch.Default display Color White*/Blue/Cream/GoldenYellow/Gray/Green/Ivory/Orange/Pink/Red/Yellow/Clear/OtherDefault display Curl correction curl down / curl up (factorydefault: 0)degree of curling of the paper. The degree of curling has7 levels upward and 7more levels downward.Default display Uneven Gloss Correction -3 to +2, (factory default: 0):increase gloss- : decrease glossTo adjust glossiness ofpaper.Changing valueswitches the fixingtemperature.Default display Media floatation fan airvolume controlweak / medium / strong(factory default: medium)The air volume at which thepaper is fanned can bemodified when faulty feedingoccurs while using the sidepaper deck - AA1 or whenuneven transfer occurs.Select [strong] when jamor double feeding occurs,and [weak] when papergets curled more thannecessary or whenuneven transfer occurs.Displayed by serviceswitch (*1)Image position control test print output / leading edgeregistration position control /left end registration positioncontrolTo controls the image positionon the paper.Displayed by serviceswitch (*1)Secondary transfer voltagecontrol+ / - 10 (factory default: 0) To control the secondarytransfer bias when faultyimage (uneven density, whitespot, etc.) occurs.Change the value to anative value. (The value1 in this case translates to100V.)COPIER >OPTION > BODY> 2TR-RVON
