Chapter 1010-22F-10-7112) Hold the hopper unit [1] as in the figure and remove it.F-10-7210.5.3 DC Power Supply Unit10.5.3.1 Preparation for Removing the Power SupplyAssembly 0013-9320imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-PRESS C1+1) Remove the rear upper cover. (page 10-14)Reference [Removing theRear Upper Cover]2) Remove the rear lower cover. (page 10-14)Reference [Removing theRear Lower Cover]10.5.3.2 Removing the Power Supply Assembly 0013-9321imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-PRESS C1+1) Remove eight clamps [1].F-10-732) Remove 19 connectors.F-10-743) Remove the DC Power supply assembly [1].- 4 screws [2]F-10-7510.5.4 Sub DC Power Supply10.5.4.1 Preparation for Removing the Sub DC PowerSupply 0013-9388imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-PRESS C1+1) Remove the left lower cover. (page 10-12)Reference [Removing theLeft Lower Cover]10.5.4.2 Removing the Sub DC Power Supply 0013-9389imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-PRESS C1+1) Remove the Sub DC power supply [1].- 4 connectors [2]- 4 screws [3]F-10-762) Remove the sub DC power supply fan [3] from the sub DC power supply[1].- 2 screws [2][1][1][1][1][1][2][2] [2][1][2][2][1][3][3]
