Chapter 99-119.2.2 Print (Constant Speed) 0012-0965imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+- In the case of plain paper (=/<105g/m2)F-9-11*1: H3 and H4 turn ON in alternate shifts*2: In the black-and-white mode/overseas models, temperature is controlled according to the temperature detected by the main thermistor (THM1) and sub ther-mistor (THM2). As for black-and-white/Japanese models, temperature is controlled by the main heater.*3: Fixing web solenoid is turned ON once for each small paper, and twice for each paper larger than that.*4: 1/3-speed rotation*5: Constant speed rotation*6: Only when the temperature of the inlet roller main thermistor (THM3) is detected as 100 deg C or more.Interval DescriptionSTBY (standby) Ready for a print request signalfixing roller surface temperature = 165 deg C/outside heating roller surface temperature = 200 deg C/fixing belt surfacetemperature = 95 deg CINTR (initial rotation) Time from receipt of the print request signal to sending image signalPRINT (print) Time from the print start to delivery of paper. Control temperature varies according to the color mode.Full color: Fixing roller surface temperature = 155 deg C/ Outside heating roller surface temperature =200 deg C / Fixing beltsurface temperature = 95 deg CBlack-and-white: Fixing roller surface temperature = 160 deg C / Outside heating roller surface temperature =200 deg C / Fixingbelt surface temperature = 95 deg CLSTR1(last rotation 1) In the case the fixing belt surface temperature reaches =/> 95 deg CLSTR2(last rotation 2) In the case the fixing belt surface temperature reaches =/> 160 deg CLSTR3(last rotation 3) In the case the fixing roller surface temperature =/> 155 deg C /outside heating roller surface temperature =/> 200 deg C /fixingbelt surface temperature =/> 90 deg CFixing main heater(H1)Fixing sub heater(H2)Outside heater(H4)Inlet heater(H3)Fixing motor(M38)Fixing belt attach/detachmotor (M34)Outside heatingattach/detach motor (M45)Fixing web attach/detach motor(M33)Fixing belt drive motor(M36)Fixing web solenoid(SL11)Fixing belt cooling fan1 4 (FM11 14)STBY INTR PRINT LSTR2 LSTR3 STBYLSTR1detachment->detachment->detachment->attachment detachmentdetachmentdetachmentattachmentattachment3 3661221144 5
