Chapter 77-105F-7-2287.14.31 Secondary Transfer Bias Roller Cleaning Blade7.14.31.1 Preparation for Removing the SecondaryTransfer Bias Roller Cleaning Blade 0013-9767imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-PRESS C1+1) Open the front cover.2) Pull out the fixing/feeding unit toward the front.3) Remove the secondary transfer outside roller unit. (page 7-101)Refer-ence [Removing the Secondary Transfer Outer Roller Unit]4) Remove the secondary transfer outside roller sub-unit. (page 7-102)Ref-erence [Removing the Secondary Transfer Outside Roller Sub-Unit]7.14.31.2 Removing the Secondary Transfer Bias RollerCleaning Blade 0013-9768imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-PRESS C1+1) Remove the secondary transfer bias roller cleaning blade [1].- 5 screws [2]F-7-2297.14.32 ITB Cleaner Brush (Large)7.14.32.1 Preparation for Removing the ITB CleanerBrush (Large) 0013-9719imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-PRESS C1+1) Open the front cover.2) Detach the process unit cover.3) Lift the hopper unit.4) Remove the primary charging assembly. (page 7-86)Reference [Re-moving the Primary Corona Assembly]5) Remove the pre-transfer charging assembly. (page 7-88)Reference [Re-moving the pre-transfer corona assembly]6) Remove the drum unit. (page 7-89)Reference [Removing the DrumUnit]7) Pull out the fixing/feeding unit.8) Remove the intermediate transfer unit. (page 7-100)Reference [Remov-ing the Intermediate Transfer Unit]9) Remove the ITB cleaning unit. (page 7-99)Reference [Removing theITB Cleaning Unit]7.14.32.2 Removing the ITB Cleaner Brush (Large) 0013-9720imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-PRESS C1+1) Detach the ITB cleaner cover [1].- 4 screws [2]F-7-2302) Remove the two cleaning roller shafts [1].- 2 screws (black) [2]- 1 screw (silver) [3]F-7-2313) Remove two screws [2] on the cleaner brush mobile arm [1], and shift inthe direction of each arrow.4) Remove the ITB cleaner brush unit (large) [3].F-7-2325) Remove the ITB cleaner brush (large) [1].- 3 E-rings [2]- 2 bearings [3][2][2][3][1][2] [1][2][2][2][1][1][1][2][3][1][2][3][3]
