Chapter 88-67- 2 edge saddles [3]- 1 harness [4]- 3 screws [5]F-8-1477) Remove the decurler sponge roller (upper) unit [1].7-1) Pull out the corner [A] area of the decurler sponge roller unit to the po-sition of [B], and then remove it in the upper direction of the arrow [C].- 1 spring [2]F-8-1488) Remove the decurler sponge roller (upper) [1].- 2 E-rings [2]- 2 washers [3]- 2 bearings [4]F-8-1498.10.11 Decurler Adjustment Roller (Lower)8.10.11.1 Preparation for Removing the Decurler SpongeRoller (lower) 0013-9777imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-PRESS C1+1) Remove the decurler. (page 8-65)Reference [Removing the Decurler]8.10.11.2 Removing the Decurler Sponge Roller (lower)0013-9779imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-PRESS C1+1) Open the front door [1] in the direction of the arrow.F-8-1502) Pull out the handle [2] of the decurler (upper) unit [1] toward you to re-lease the lock.F-8-1513) Detach the decurler lower inside cover [1].- 4 screws [2]F-8-1524) Detach the lower roller guide plate [1].- 2 screws [2]F-8-1535) Remove the decurler sponge roller (lower) [1] .- 2 E-rings [2]- 2 washers [3]- 2 bearings [4][3][4] [5] [1][2][2][5][1][2][A][B] [C][2][2][3][3][4][4][1][1][1][2][2][1][1][2][2]
