Chapter 1616-290T-16-21216.6.3 SORTER16.6.3.1 SORTER List 0011-9649imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+T-16-21316.6.4 BOARD16.6.4.1 BOARD List 0011-9650imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+T-16-214FEEDER>OPTIONSubheading Contents LevelDOC-F-SW Switch ON/OFF of the stream reading mode.1Setting range0: Perform stream reading.1: Perform stream reading for small-size paper only. (Do not perform stream reading for large-size paper)2: Do not perform stream reading.SLW_SPRT Slow down the paper separation speed to reduce a jam occurrence ratio of folded document.When folded paper is fed, double feeding sometimes occurs. This mode is used to switch theseparation sequence to reduce a jam occurrence ratio.1Setting range0: Normal mode1: Folded document modeStandard value0HS-DBL Switch ON/OFF of the ADF high-speed reverse mode.Provide a high-speed reverse mode to meet the needs of users who emphasize productivity in theADF double-sided copy mode.1Setting range0: OFF (Do not perform the high-speed double sided copy mode. : Normal mode)1: ON (Perform the high-speed double sided copy mode. : High-speed double sided copy mode)Standard value0SORTER>OPTIONSubheading Contents LevelMD-SPRTN Set the restriction of finisher function.1Setting range0: Normal operation1: Perform degeneration.Standard value0BOARD>OPTIONSubheading Contents LevelMENU-1 to 4 Set whether or not to display Level 1 to 4 for the printer setting menu.2Setting range0: Do not display the level.1: Display the level.Standard value0
