Canon imagePRESS C1 P Service Manual

Also see for imagePRESS C1: User guide User guide INSTALLATION PROCEDURE

Contents

Canon imagePRESS C1 P Service Manual Manual pdf 432 page image

Chapter 77-837.14 Parts Replacement Procedure7.14.1 Process Unit7.14.1.1 Preparation for Sliding the Processing Unit 0014-1119imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-PRESS C1+1) Open the front cover.2) Detach the processing unit cover.3) Lift the hopper unit.7.14.1.2 Sliding the Processing Unit 0014-1120imagePRESS C1 P / imagePRESS C11) Remove the drum fixing mount [1].- 1 screw [2]F-7-103Points to Note When Attaching the Drum FixturesWhen attaching the drum fixtures, be sure not to rotate the drum clockwise.If the drum is rotated clockwise, which is the reverse of its normal direction,the scoop-up sheet may become soiled and toner may scatter.2) Disconnect the 6 connectors [1], and remove the cable from the cableguide [2] and the clamp [3].F-7-1043) Disconnect the 1 connector [1] and the 7 connectors [2].F-7-1054) Remove the 5 screws [1].F-7-1065) Loosen the 3 processing link shafts [1].Check to see that processing link shafts can be moved back and front.F-7-1076) Bring down the fixing feeding release lever [1] in the direction below.F-7-1087) Slide the fixing feeding unit [1].When sliding the fixing feeding unit, be sure to completely disconnect theconnectors [1] in step 3.[1][2][1] [2] [3][1][1][2][1][1][1]