Chapter 1010-33F-10-13710.5.16 AC Driver PCB10.5.16.1 Preparation for Removing the AC Driver PCB 0013-9288imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-PRESS C1+1) Remove the rear lower cover. (page 10-14)Reference [Removing theRear Lower Cover]10.5.16.2 Removing the AC Driver PCB 0013-9292imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-PRESS C1+1) Remove the connector [1] and 5 faston terminals [5], and remove the cable[2].- 3 edge saddles [3]- 1 clamp [4]F-10-1382) Remove 9 connectors [1].F-10-1393) Pull out the AC driver PCB [1].- 5 screws [2]F-10-1404) Remove the 2 connectors [1], and remove the AC driver PCB [2].F-10-14110.5.17 Pickup Driver PCB10.5.17.1 Preparation for Removing the Pick-Up DriverPCB 0013-9393imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-PRESS C1+1) Remove the rear upper cover. (page 10-14)Reference [Removing theRear Upper Cover]2) Remove the rear lower cover. (page 10-14)Reference [Removing theRear Lower Cover]3) Remove the DC power supply assembly. (page 10-22)Reference [Re-moving the Power Supply Assembly]10.5.17.2 Removing the Pick-Up Driver PCB 0013-9394imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-PRESS C1+1) Remove the pick-up driver PCB [1].- 7 clamps [2]- 5 screws [3]- 1 PCB support [4][1][2][2][2] [2][3][3][3][3] [3][1][2][3][4][5][1][1][1][2] [2][1][2]
