95Advanced GuideBasic Guide1 Camera Basics2 Auto Mode /Hybrid Auto Mode3 Other Shooting ModesTv, Av, and M Mode6 Playback Mode7 Wi-Fi Functions8 Set-Up Menu9 Accessories10 AppendixIndex4 P Mode5 Tv, Av, M, and C ModesBefore UseSwitching Display ModesPress the [ ] button in playback mode to switch between noinformation display, information display 1 (basic info), and informationdisplay 2 (details).● Switching display modes is not possible while the camera isconnected via Wi-Fi to devices other than printers.Defining Displayed Shooting DataYou can set up the screens to display the information you want. For detailson the information displayed on each screen, see “Playback” (= 175).1 Access the setting screen.● Select [Playback information display] onthe [ 4] tab and press the [ ] button.2 Select the information to display.● Press the [ ][ ] buttons or turn the [ ]dial to choose the info you want displayedand then press the [ ] button to add a[ ].● To return to the menu screen, press the[ ] button.● Use the display sample on the left side of the screen to see whatyour selected effect in step 2 will look like.● Place a [ ] on [Info display 2] to display settings info from [ ]mode. When you press the [ ] button, you will see [ ]settings, followed by [Info Display 2].● To stop movie playback, touch thescreen. This screen is displayed, and thecamera is ready for your next operation.- Touch [ ] to display the volume panel,and then touch [ ][ ] to adjust thevolume.- To switch frames, touch the scrollbar ordrag left or right.- To resume playback, touch [ ].- Touch [ ] to return to the screen instep 2 of “Viewing” (= 93).
