151Advanced GuideBasic Guide1 Camera Basics2 Auto Mode /Hybrid Auto Mode3 Other Shooting ModesTv, Av, and M Mode6 Playback Mode7 Wi-Fi Functions8 Set-Up Menu9 Accessories10 AppendixIndex4 P Mode5 Tv, Av, M, and C ModesBefore UsePowering the Camera with Household PowerStill Images MoviesPowering the camera with AC Adapter Kit ACK-E17 (sold separately)eliminates the need to monitor the remaining battery level.1 Make sure the camera is off.2 Insert the coupler.● Follow step 1 in “Inserting the BatteryPack and Memory Card” (= 17) toopen the cover.● Holding the coupler with the terminals (1)facing as shown, insert the coupler justas you would a battery pack (followingstep 2 in “Inserting the Battery Pack andMemory Card” (= 17)).● Follow step 4 in “Inserting the BatteryPack and Memory Card” (= 18) toclose the cover.3 Connect the adapter to the coupler.● Open the cover and insert the adapterplug fully into the coupler.4 Connect the power cord.● Insert one end of the power cord into thecompact power adapter, and then plugthe other end into a power outlet.● Turn the camera on and use it as desired.● When finished, turn the camera off andunplug the power cord from the outlet.3 Turn the TV on and switch toexternal input.● Switch the TV input to the external inputyou connected the cable to in step 2.4 Turn the camera on.● Press the [ ] button to turn the cameraon.● Images from the camera are nowdisplayed on the TV. (Nothing isdisplayed on the camera screen.)● When finished, turn off the camera andTV before disconnecting the cable.● Touch-screen operations are not supported while the camera isconnected to a television.● When the camera and TV are connected, you can also shootwhile previewing shots on the larger screen of the TV. To shoot,follow the same steps as when using the camera screen.However, magnifying images (= 100 ) is not available.● The camera will not beep.
