112Advanced GuideBasic Guide1 Camera Basics2 Auto Mode /Hybrid Auto Mode3 Other Shooting ModesTv, Av, and M Mode6 Playback Mode7 Wi-Fi Functions8 Set-Up Menu9 Accessories10 AppendixIndex4 P Mode5 Tv, Av, M, and C ModesBefore Use3 Correct the image.● Press the [ ] button.● Red-eye detected by the camera is nowcorrected, and frames are displayedaround corrected image areas.● Enlarge or reduce images as needed.Follow the steps in “Magnifying Images”(= 100).4 Save as a new image and review.● Press the [ ][ ][ ][ ] buttons or turnthe [ ] dial to choose [New File], andthen press the [ ] button.● The image is now saved as a new file.● Follow step 2 in “Resizing Images”(= 109).● Press the [ ] button, and thenfollow step 3 in “Resizing Images”(= 109).● Some images may not be corrected accurately.● To overwrite the original image with the corrected image, choose[Overwrite] in step 4. In this case, the original image will beerased.● Protected images cannot be overwritten.● RAW images cannot be edited this way.● Red-eye correction can be applied to JPEG images saved withRAW images, but the original image cannot be overwritten.● You can save images by touching [New File] or [Overwrite] on thescreen in step 4.3 Save as a new image and review.● Press the [ ] button.● Follow steps 2 – 3 in “Resizing Images”(= 109).● To switch the orientation of the frame to vertical in [ ] mode,press the [ ][ ] buttons in step 2. To move the frame, press the[ ][ ] buttons again. To return the frame to horizontal orientation,press the [ ][ ] buttons.● This can also be done by pressing the [ ] button, selecting[Image Search] on the [ 1] tab, selecting an image and pressingthe [ ] button.● In step 2, you can also touch and drag the bar across the bottomof the screen to edit images. You can also move the frame bytouching or dragging across the screen in [ ] mode.Correcting Red-EyeStill Images MoviesAutomatically corrects images affected by red-eye. You can save thecorrected image as a separate file.1 Choose [Red-Eye Correction].● Press the [ ] button, and thenchoose [Red-Eye Correction] on the [ 2]tab (= 32).2 Choose an image.● Press the [ ][ ] buttons or turn the [ ]dial to choose an image.
