87Advanced GuideBasic Guide1 Camera Basics2 Auto Mode /Hybrid Auto Mode3 Other Shooting ModesTv, Av, and M Mode6 Playback Mode7 Wi-Fi Functions8 Set-Up Menu9 Accessories10 AppendixIndex4 P Mode5 Tv, Av, M, and C ModesBefore UseCustomizing Displayed Data● Follow steps 1 – 2 in “CustomizingDisplay Information” (= 87) to select[Custom display 1] or [Custom display 2]and then press the [ ] button.● Press the [ ][ ] buttons or turn the [ ]dial to choose the information to displayand then press the [ ] button to add a[ ].● Press the [ ] button to return to the[Display switching] screen and check theresulting display.● Go to [Shooting information display] on the [ 1] tab and choose[Grid display] to change to a finer grid.● Go to [Shooting information display] on the [ 1] tab and choose[Histogram] to change the displayed histogram from a brightnesshistogram to an RGB histogram.Customizing Controls andDisplayCustomizing Display InformationYou can define which screens are shown when the [ ] buttonis pressed in the shooting screen. You can also customize the datadisplayed by the screens.1 Access the setting screen.● Choose the [ 1] tab, select [Shootinginformation display], and then choose[Display switching] and press the [ ]button (= 31).2 Configure the settings.● Press the [ ][ ] buttons or turn the [ ]dial to choose the screens you do notwant displayed and then press the [ ]button to remove the [ ]. Press the [ ]button again to add a [ ].● To return to the menu screen, press the[ ] button.● Use the display sample on the left side of the screen to see whatyour selected effect in step 2 will look like.● You cannot remove all [ ] or add a [ ] only to [INFO. QuickControl].
