90Advanced GuideBasic Guide1 Camera Basics2 Auto Mode /Hybrid Auto Mode3 Other Shooting ModesTv, Av, and M Mode6 Playback Mode7 Wi-Fi Functions8 Set-Up Menu9 Accessories10 AppendixIndex4 P Mode5 Tv, Av, M, and C ModesBefore UseSaving Shooting Settings ([C] Mode)Still Images MoviesSave commonly used shooting modes and your configured functionsettings for reuse. To access saved settings later, simply turn the modedial to [ ]. Even settings that are usually cleared when you switchshooting modes or turn the camera off (such as self-timer settings) can beretained this way.Settings that can be saved● Shooting modes ([ ], [ ], [ ], and [ ])● Items set in [ ], [ ], [ ], and [ ] modes (= 61 – = 84)● Shooting menu settings● My Menu settings (= 91)1 Enter a shooting mode with settingsyou want to save, and change thesettings as desired.2 Access the Register Settingsscreen.● Press the [ ] button, choose[Custom shooting mode (C)] on the [ 4]tab, and then press the [ ] button.3 Register.● Press the [ ][ ] buttons or turn the [ ]dial to choose [Register settings], andthen press the [ ] button.● A confirmation screen will appear. Pressthe [ ][ ] buttons or turn the [ ] dialto select [OK], and then press the [ ]button.● To restore the [ ] button, [ ]([ ]) button, and movie buttonto their defaults, choose [ ], [ ] and [ ] respectively.● If you don’t want to add functions to the [ ] button,[ ]([ ]) button, and movie button, choose [ ], [ ] and [ ]respectively.● Icons labeled with [ ] in the [ ] button, [ ]([ ]) button andmovie button assignment screen indicate that the function is notavailable in the current shooting mode or under current functionconditions.● Assign [ ] to a button, and every time the button is pressed, thecamera will switch between saving or not saving simultaneousRAW images.● Assign [ ] to a button, and the camera will use the definedaperture value while the button is pressed, letting you preview thedepth of field.● Assign [ ] to a button, and the screen display will disappearwhen the button is pressed. Perform one of the following actionsto restore the display.- Press a button other than the power button- Turn the exposure compensation dial, mode dial, or [ ][ ]dials- Change the camera’s vertical/horizontal orientation- Open or close the flash- Open the LCD monitor and rotate it upward all the way, or closethe LCD monitor when rotated upward all the way
