164Advanced GuideBasic Guide1 Camera Basics2 Auto Mode /Hybrid Auto Mode3 Other Shooting ModesTv, Av, and M Mode6 Playback Mode7 Wi-Fi Functions8 Set-Up Menu9 Accessories10 AppendixIndex4 P Mode5 Tv, Av, M, and C ModesBefore UsePrint TypeStandard One image is printed per sheet.Index Smaller versions of multiple images areprinted per sheet.Both Both standard and index formats areprinted.Date On Images are printed with the shooting date.Off –File No. On Images are printed with the file number.Off –ClearDPOF dataOn All image print list settings are clearedafter printing.Off –● Not all of your DPOF settings may be applied in printing by theprinter or photo development service, in some cases.● [ ] may be displayed on the camera to warn you that thememory card has print settings that were configured on anothercamera. Changing the print settings using this camera mayoverwrite all previous settings.● Setting [Date] to [On] may cause some printers to print the datetwice.● Specifying [Index] will prevent you from choosing [On] for both[Date] and [File No.] at the same time.● Index printing is not available on some Canon-brand PictBridge-compatible printers (sold separately).● The date is printed in a format matching the setting details in[Date/Time] on the [ 2] tab (= 18) of the menu (= 32).● To cancel printing in progress, press the [ ] button, choose [OK],and then press the [ ] button again.● [ID Photo] and [Sequence] cannot be chosen on Canon-brandPictBridge-compatible printers from CP720/CP730 and earliermodels.Adding Images to the Print List (DPOF)Still Images MoviesBatch printing (= 166) and ordering prints from a photo developmentservice can be set up on the camera. Choose up to 998 images on amemory card and configure relevant settings, such as the number ofcopies, as follows. The printing information you prepare this way willconform to DPOF (Digital Print Order Format) standards.● RAW images cannot be included in print list.Configuring Print SettingsStill Images MoviesSpecify the printing format, whether to add the date or file number, andother settings as follows. These settings apply to all images in the printlist.● Press the [ ] button, choose [Printsettings] on the [ 2] tab, and then pressthe [ ] button.● Press the [ ][ ] buttons or turn the[ ] dial to choose [Print Settings]. Pressthe [ ] button, and on the next screen,adjust the desired settings (= 32).
