154Advanced GuideBasic Guide1 Camera Basics2 Auto Mode /Hybrid Auto Mode3 Other Shooting ModesTv, Av, and M Mode6 Playback Mode7 Wi-Fi Functions8 Set-Up Menu9 Accessories10 AppendixIndex4 P Mode5 Tv, Av, M, and C ModesBefore UseUsing an External Flash (Sold Separately)Still Images MoviesMore sophisticated flash photography is possible with an optionalSpeedlite EX series flash. For movie shooting using an LED light, theoptional Speedlite 320EX flash is available.● Non-EX series Canon flash units may not fire correctly or may notfire at all, in some cases.● Use of non-Canon flash units (especially high-voltage flash units)or flash accessories may prevent normal camera operation andmay damage the camera.● Also refer to the Speedlite EX series manual for additionalinformation. This camera is a Type-A camera that can use all thefeatures of EXseries Speedlites.1 Attach the flash.● Make sure the camera is off beforeattaching the flash.2 Turn the flash on, and then turn thecamera on.● A red [ ] icon is now displayed.● The flash pilot lamp will light up when theflash is ready.● Although the electronic viewfinder is produced under extremelyhigh-precision manufacturing conditions and more than 99.99% ofthe pixels meet design specifications, in rare cases some pixelsmay be defective or may appear as red or black dots. This is not amalfunction. They do not affect the images recorded.● Vertical or horizontal black bars may be displayed depending onthe selected aspect ratio (= 45). The black bars indicate imageareas not recorded.● Press the [ ] button on the electronic viewfinder to change thescreen displayed.● In the menu (= 32), set the [Display Control] option on the[ 1] tab to [Manual] to keep the camera screen from turning oneven when you remove your eye from the viewfinder. Press the[ ] button on the electronic viewfinder to bring up the cameradisplay in this mode.● Using the electronic viewfinder in [ ], [ ], [ ], [ ], and[ ] modes will result in a smoother display in both the viewfinderand camera screen. In the menu (= 32), set the [DisplayMode] option on the [ 1] tab to [Power Saving] to return to thenormal display and conserve battery power.● If the Wi-Fi (= 115) or keyboard screen (= 33) displays arebrought up in electronic viewfinder mode, the display will switchback to the camera screen.● Different brightness settings (= 140) can be defined for theelectronic viewfinder and camera screens.
