76Advanced GuideBasic Guide1 Camera Basics2 Auto Mode /Hybrid Auto Mode3 Other Shooting ModesTv, Av, and M Mode6 Playback Mode7 Wi-Fi Functions8 Set-Up Menu9 Accessories10 AppendixIndex4 P Mode5 Tv, Av, M, and C ModesBefore UseShooting with the FE LockStill Images MoviesJust as with the AE lock (= 61), you can lock the exposure for flashshots.1 Raise the flash and set it to [ ](= 75).2 Lock the flash exposure.● Aim the camera at the subject to shootwith the exposure locked, and then pressthe [ ] button.● The flash fires, and when[ ] is displayed, the flash output level isretained.● Press the [ ] button again to cancel andremove the [ ] icon.3 Compose the shot and shoot.● FE: Flash Exposure● While in FE lock, a circle in the center of the screen shows thecurrent metering range.● If standard exposure is not achieved even after the flash fires instep 2, [ ] flashes. Follow step 2 while the subject is within flashrange.Adjusting the Flash Exposure CompensationStill Images MoviesJust as with regular exposure compensation (= 61), you can adjust theflash exposure from –2 to +2 stops, in 1/3-stop increments.● Raise the flash, press the [ ] button andimmediately turn the [ ] dial to choosethe compensation level, and then pressthe [ ] button.● The correction level you specified is nowdisplayed.● You can configure the flash exposure compensation by accessingMENU (= 32) and choosing [ 3] tab > [Flash Control] >[Built-in flash settings] > [ exp. comp.].● You can also access the [Flash Control] screen (= 32) asfollows.- Press and hold the [ ] button for at least one second.- When the flash is up, press the [ ] button and immediatelypress the [ ] button.● You can also access the [Flash Control] screen (= 32) bypressing the [ ] button and touching [ ].
