77Advanced GuideBasic Guide1 Camera Basics2 Auto Mode /Hybrid Auto Mode3 Other Shooting ModesTv, Av, and M Mode6 Playback Mode7 Wi-Fi Functions8 Set-Up Menu9 Accessories10 AppendixIndex4 P Mode5 Tv, Av, M, and C ModesBefore UseResetting Flash SettingsStill Images MoviesYou can reset the internal flash settings to their defaults.● Press the [ ] button, choose [FlashControl] on the [ 3] tab, and select[Clear settings].● Choose [Clear built-in flash set.] andpress the [ ] button. On the next screen,press the [ ][ ] buttons or turn the [ ]dial to choose [OK], and then press the[ ] button.Changing the Flash TimingStill Images MoviesChange the timing of the flash and shutter release as follows.● Press the [ ] button, choose [FlashControl] on the [ 3] tab, and select[Built-in flash settings].● Choose [Shutter Sync.], and then choosethe desired option (= 32).1st curtain The flash fires immediately after the shutter opens.2nd curtain The flash fires immediately before the shuttercloses.● If the shutter speed is set to 1/100 or faster, the flash fires on [1stcurtain], even if [2nd curtain] is selected.Changing the Flash Metering ModeStill Images MoviesWhen shooting with the flash, [Evaluative] is used for a standard flashexposure. This metering method can be changed to average flashmetering mode across the overall flash region, such as when using anexternally metered flash.● Press the [ ] button, choose [FlashControl] on the [ 3] tab, select [E-TTL IImeter.], and then select [Average].● When using [Average], adjust your flash metering compensationfor the scene to be shot.
