47Advanced GuideBasic Guide1 Camera Basics2 Auto Mode /Hybrid Auto Mode3 Other Shooting ModesTv, Av, and M Mode6 Playback Mode7 Wi-Fi Functions8 Set-Up Menu9 Accessories10 AppendixIndex4 P Mode5 Tv, Av, M, and C ModesBefore UseChanging the Image Display Period after ShotsStill Images Movies● Press the [ ] button, choose[Image review] on the [ 1] tab, and thenchoose the desired option.● To restore the original setting, repeat thisprocess but choose [2 sec.].2 sec.,4 sec.,8 sec.Displays images for the specified time. Even while the shot isdisplayed, you can take another shot by pressing the shutterbutton halfway again.Hold Displays images until you press the shutter button halfway.Off No image display after shots.● By pressing the [ ] button while an image is displayed aftershooting, you can switch the display information.Customizing Camera OperationCustomize shooting functions on the [ ] tab of the menu screen asfollows.For instructions on menu functions, see “Using the Menu Screen”(= 32).Preventing the Red-Eye Reduction Lamp fromLighting UpStill Images MoviesYou can deactivate the red-eye reduction lamp that lights up to reducered-eye when the flash is used in low-light shots.1 Access the [Flash Control] screen.● Press the [ ] button, choose [FlashControl] on the [ 3] tab, and then pressthe [ ] button (= 32).2 Configure the setting.● Choose [Red-eye reduc.], and thenchoose [Off] (= 32).● To restore the original setting, repeat thisprocess but choose [On].
