135Advanced GuideBasic Guide1 Camera Basics2 Auto Mode /Hybrid Auto Mode3 Other Shooting ModesTv, Av, and M Mode6 Playback Mode7 Wi-Fi Functions8 Set-Up Menu9 Accessories10 AppendixIndex4 P Mode5 Tv, Av, M, and C ModesBefore Use2 Select a share setting.● Press the [ ][ ] buttons or turn the [ ]dial to choose a menu item.● If selecting [All images] or [Images shottoday], press the [ ] button.● If selecting [Images shot in past days],press the [ ] button. In the screen thatappears, press the [ ][ ] buttons toselect the number of days, and thenpress the [ ] button.● If selecting [Select by rating], press the[ ] button. In the screen that appears,press the [ ][ ] buttons to select therating, and then press the [ ] button.● If selecting [File number range], press the[ ] button. In the screen that appears,select the beginning and end of the filenumber range, choose [OK], and thenpress the [ ] button. Follow steps 2 – 3in “Selecting a Range” (= 103) to definethe range.● Choose [All images] when shooting remotely.Erasing Connection InformationErase connection information (information about devices that you haveconnected to) as follows.● Following step 4 in “Editing ConnectionInformation” (= 134), choose [EraseConnection Info] and press the [ ]button.● After [Erase?] is displayed, press the[ ][ ] buttons or turn the [ ] dial tochoose [OK], and then press the [ ]button.● The connection information will beerased.Specifying Images to Share with SmartphonesYou can change the device nickname (display name) that is displayed onthe camera.Share setting Images shared with smartphoneAll images All images stored on the cardImages shot today Images shot on the current dayImages shot in pastdaysImages shot within a specified previousnumber of daysSelect by rating Images with the specified rating (= 108)File number range Images within the specified rangeThis setting is also possible whenever the screen in step 2 is displayedduring the smartphone connection.1 Access the setting screen.● Follow step 4 in “Editing ConnectionInformation” (= 134), choose [ViewSettings] and then press the [ ] button.
