Panasonic TH-98SQ1W Operating Instructions Manual

Also see for TH-86SQ1W: Operating instructions Operating instructions Operating Instructions - Basic Guide Operating instructions Operating instructions

Contents

Panasonic TH-98SQ1W Operating Instructions Manual Manual pdf 75 page image

75English■ [USB memory network settings]Sets whether to permit the network setting using theUSB memory device. (see page 125)[Permit]:Permits USB memory network settings.[Prohibit]:Prohibits USB memory network settings.Note● This function is set to [Permit] as factory default.● Once the network setting is done with USB memorydevice, this function is set to [Prohibit].■ [LAN control protocol]Select the LAN control protocol.[Protocol 1]:Control with the Panasonic Display sequence.[Protocol 2]:Control with the sequence that is compatible withPanasonic Projector.Note● For PJLink and WEB browser control, the operation ispossible regardless of the setting.● When operating the “Multi Monitoring & ControlSoftware”, select [Protocol 2].■ [Reset]You can reset the network setting to the factory defaultof the Display.Select [Yes] with and press .Network settingsResetYes NoNote● The settings for [NTP synchronization], NTP serverand [Time zone] will be reset to the factory default.USB media player settingsSet for “USB media player”.For details of the function, refer to “USB media player”(see page 102).[USB media player settings] - submenu screenUSB media player settingsUSB media playerScenario file checkNo scenario fileSlide show durationEnable10 secSchedule play function EnableVideo playback mode StandardSchedule play function default settingPlay mode Individual playCurrent setting Individual playPlaylist editStill picture rotation LandscapeResume play OnCodec information■ [USB media player]Set to enable or disable the USB media player function.■ [Schedule play function]Enables/Disables the schedule playback function using“Content Management Software”.Note● When [Schedule play function] is set to [Enable],if both the scenario file of the existing “USB mediaplayer” and the schedule file of this function arepresent, the [Schedule play function] operation takespriority.● [USB media player] cannot be changed during theschedule playback mode.■ [Video playback mode]Sets the video playback mode.If image disturbance occurs at the switching timing ofmotion picture files during playback in [Standard] mode,switch to [Adjust] mode.[Standard]: Plays without a black image at the jointbetween video files.[Adjust]: Plays with a black image (approx. 2seconds) inserted at the joint betweenvideo files.Note● When using the Multi Media Player, a black screen isdisplayed for a certain period of time at the switchingtiming of motion picture files regardless of the [Videoplayback mode] settings.● The display may be disturbed at the switching timingof files during playback in [Standard] mode.● When the schedule playback is proceeding using“Content Management Software”, [Video playbackmode] can be switched both in single mode and multimode.