Panasonic TH-98SQ1W Operating Instructions Manual

Also see for TH-86SQ1W: Operating instructions Operating instructions Operating Instructions - Basic Guide Operating instructions Operating instructions

Contents

Panasonic TH-98SQ1W Operating Instructions Manual Manual pdf 60 page image

60EnglishFailover/FailbackAutomatically switches to the backup input if aninterruption of video occurs.Note● MEMORY VIEWER input is excluded from thisfunction.1. Setting the input change mode■ [Input change mode][Off]:Disables the Backup Input function.Failover/FailbackInput change mode Off[Quick]:Promptly switches to the backup input if aninterruption of video occurs.The backup video signal needs to be in the sameformat as the (main) input in use for viewing.Upon switching to the backup input, the video andaudio adjustment values for the (main) input usedfor viewing will be inherited.Failover/FailbackInput change modePrimary backup inputAuto switch back modeBackup input changeSecondary backup inputMain inputCurrent inputQuickHDMI1HDMI2DisableActiveHDMI2Main inputChanging mode High speed[Normal]:Switches to the backup input if an interruption ofvideo occurs.The backup video signal does not need to be in thesame format as the (main) input in use for viewing.Upon switching to the backup input, the video andaudio adjustment values for the backup input willbe used.1-1 [Input change mode]: [Quick] detailedsettingsPromptly switches to the backup input if aninterruption of video occurs, and enables switchingbetween digital (HDMI1 / HDMI2) inputs.Note● This function will start operating once a video signal isdetected by both the input in use for viewing and thebackup input and the [Backup input change] item isdisplayed as [Active].● This function may not operate correctly depending onthe image playback device or video signal.■ [Primary backup input]Sets the first priority backup input.(None) / [HDMI1] / [HDMI2] / DisplayPort] / [DVI-D]/ [SLOT]The input that is of the same type as the one in usefor viewing will be greyed out.■ [Secondary backup input]Sets the second priority backup input.(None) / [HDMI1] / [HDMI2] / DisplayPort] / [DVI-D]/ [SLOT]The input that is of the same type as the one in usefor viewing will be greyed out.■ [Auto switch back mode]Sets whether or not to automatically return to theformer (main) input when the former input videoinitially viewed is restored while viewing the videoof the backup input enabled by the operation of theBackup Input function.[Disable]:Unreturned[Enable]:Returned■ [Changing mode]Select speed of input switching.[High speed]:If switching between the same signal formats, it ispossible to switch within 1 second.If switching between the different signal formats,picture noise is caused.[Normal speed]:If switching between the same signal formats, it ispossible to switch within 2 seconds.If switching between the different signal formats, ittakes 3 to 4 seconds to switch but picture noise isnot caused.