19EnglishVideo equipment connectionQ40G1000-037-79A101311127 8 91 EXT SP: Speaker TerminalConnect to external speaker.(see page 29)2 AUDIO OUT: Analogue Audio OutputTerminalConnect to audio equipment withanalogue audio input terminal.(see page 28)3 DIGITAL LINK /LAN:DIGITAL LINK / LAN TerminalControl the Display by connectingto Network. Alternatively, connectto a device that sends video andaudio signals via the DIGITALLINK terminal.(see page 25, 84)4 SERIAL IN: SERIAL Input TerminalControl the Display by connectingto PC.(see page 26)5 LAN: LAN TerminalControl the Display by connectingto Network.(see page 84)6 IR IN,IR OUT:Infrared Signal Input / OutputTerminalUse this when operating morethan one display with one remotecontrol.(see page 27)7 USB: USB Terminal (2 systems)Connect the USB memory to use“USB media player” or “Memoryviewer”. Also, this can be usedto supply power of up to 5V/1A(front side terminal) or 5V/2A(far side terminal) to an externaldevice when the picture isdisplayed.(see page 28)8 PC IN: PC Input TerminalConnect to video terminal of PC,video equipment with “YP BPR /YC BC R ” or “RGB” output.(see page 22)9 DisplayPort IN,DisplayPort OUT:DisplayPort Input / OutputTerminal (Supports 4K picture)Connect to PC or videoequipment with DisplayPortterminal. (see page 23)10 AV IN(HDMI 1,HDMI 2):HDMI Input Terminal(2 systems)Connect to video equipment withHDMI output.(see page 20)11 DVI-D IN: DVI-D Input TerminalConnect to video equipment withDVI-D output.(see page 21)12 AUDIO IN 1,AUDIO IN 2:Analogue Audio Input Terminal(2 systems)(see page 21, 22)13 SLOT: Expansion slot(see page 14)Note● For the compatible function board, consult the dealerwhere you purchased the product.
