Panasonic TH-98SQ1W Operating Instructions Manual

Also see for TH-86SQ1W: Operating instructions Operating instructions Operating Instructions - Basic Guide Operating instructions Operating instructions

Contents

Panasonic TH-98SQ1W Operating Instructions Manual Manual pdf 57 page image

57EnglishNote● If [4K/60p/SDR] or [4K/60p/HDR] is selected andpictures are not displayed correctly during 4Kvideo signal input, switch the setting to [4K/30p].● If [4K/60p/SDR], [4K/60p/HDR] or [4K/30p] isselected and pictures are not displayed correctlyduring 2K or lower video signal input, switch thesetting to [2K].● For details of signals written in EDID of [4K/60p/SDR], [4K/60p/HDR], [4K/30p] and [2K], see“Preset Signals” (see page 128).■ [Dynamic range]This menu is displayed in HDMI 1 and HDMI 2 inputs.Switches the dynamic range.[Auto]:Sets automatically according to the AVIInfoFrameinformation.[HDR(PQ)]Sets the dynamic range in compatible with HDR(PQ (Perceptual Quantization)).[HDR(HLG)]:Sets the dynamic range in compatible with HDR(HLG (Hybrid Log Gamma)).[SDR]:Sets the dynamic range in compatible with SDR.■ [Colour gamut]This menu is displayed in HDMI 1 and HDMI 2 inputs.Switches the colour gamut.[Auto]:Sets the colour gamut automatically according tothe ITU-2020 emu. information of AVIInfoFrame.[Native]:Displays with the colour space unique to this unit.[ITU-2020 emu.]:Displays with the colour space close to the ITU-RBT2020 standard.■ Input signal displayDisplays the frequency and the type of the currentinput signal.60.00 Hz74.18 MHz1080/60i33.72 kHzH-freq.V-freq.Dot clock freq.Signal formatHDCP status NoneDisplay range:Horizontal (15 kHz ‒ 135 kHz)Vertical (24 Hz ‒ 120 Hz)The dot clock frequency is displayed when Digital andPC signal are input.The HDCP status information is displayed whendigital signals are input.Power on settingsMakes various settings at power-on.[Power on settings] - submenu screen0Power on settingsInitial inputInitial startupInitial VOL functionInitial VOL levelInformation(Power management)Power ON screen delayInformation(No activity power off)OffLast memoryOffOffOffOff■ [Initial input]Sets the input at power-on.[Off] / [HDMI1] / [HDMI2] / [DisplayPort] / [DIGITALLINK] / [DVI-D] / [SLOT] / [PC] / [USB] / [MEMORYVIEWER] / [Multi input display]Note● When [Input lock] is set to the item other than [Off],this menu will be greyed out and cannot be set. (seepage 69)■ [Initial startup]Sets the power status of the main unit when thepower plug is inserted/extracted, or when the poweris restored from instantaneous interruption due toblackout, etc.[Last memory]:Restored to the state before the power is turnedoff.[On]:Restored to the power-on state. (power indicator:green)[Standby]:Restored to the standby state. (power indicator:red / orange)Note● When multiple units are installed, it is recommendedto select [Standby] to reduce the load when the poweris restored.■ [Initial VOL function]Enables/Disables the volume setting function atpower-on.[Off]:Volume before power-off[On]:Volume set for [Initial VOL level]