Panasonic TH-98SQ1W Operating Instructions Manual

Also see for TH-86SQ1W: Operating instructions Operating instructions Operating Instructions - Basic Guide Operating instructions Operating instructions

Contents

Panasonic TH-98SQ1W Operating Instructions Manual Manual pdf 80 page image

80EnglishOptionsThis menu displays the information of this unit, andrestores data to the factory default state.[Options] - submenu screenOptionsDisplay informationSoftware licensesCloning passwordUSB data cloningShippingLAN data cloningOutput log data■ [Display information]Displays the serial number and software version of thisunit.■ [Software licenses]Displays the software license.■ [Cloning password]Sets the password for the cloning function.For more detail of the settings, see “Changing thecloning password”. (see page 124)Note● The initial password in the factory default state is[AAAA].● Change the password periodically, and set one whichis difficult to guess.● For initialization method for the cloning password,consult the dealer where you purchased the product.■ [USB data cloning], [LAN data cloning]Copies the data of a single display to multiple displaysby using the USB memory device or via LAN. For moredetail of the settings, see “Using data cloning”. (seepage 121)■ [Output log data]Saves a log for servicing to the USB memory device.■ [Shipping]Restores the data of this unit to the factory default state.For more detail of the settings, see “Shipping condition”.(see page 131)Control settingsSets each item of the function which enables to controlmultiple displays at the same time, or individually.[Control settings] - submenu screenControl settingsSerial response(ID all) OffDisplay IDController ID function OffSerial ID function OffSerial response (Normal) On■ [Display ID]Set ID number when controlling the Display with[Controller ID function] and [Serial ID function].0 to 100 (Standard value: 0)■ [Controller ID function]Enables/disables the [Controller ID function].[Off]:Disables the [Controller ID function]. (Can beoperated as normal remote control.)[On]:Enables the [Controller ID function]. Effective onswitching to [On].Note● To use the [Controller ID function], setting ID numbersboth for the remote control and for the display unit isrequired.For ID number setting for the remote control, seepage 126.● About how to reset the settings to defaults, refer to“Initialization”. (see page 131)■ [Serial ID function]Set to control external control with the PC connected toSERIAL terminal according to the Display’s ID number.[Off]:Disables external control by the ID.[On]:Enables the external control by the ID.■ [Serial response (Normal)]Sets whether to send the response command to normalcommands without ID.[Off]:Does not respond. (Including the inquirycommand)[On]:Responds.■ [Serial response(ID all)]Set whether to respond to the command or not, whenserial command of ID number “0” is received.[Off]:Does not respond.[On]:Responds.