Panasonic TH-98SQ1W Operating Instructions Manual

Also see for TH-86SQ1W: Operating instructions Operating instructions Operating Instructions - Basic Guide Operating instructions Operating instructions

Contents

Panasonic TH-98SQ1W Operating Instructions Manual Manual pdf 53 page image

53English2-1 [4 input display] detailed settings■ [Input (Upper/Left)] to [Input (Lower/Right)]Set the input to display on the screen.[HDMI1] / [HDMI2] / [DisplayPort] / [DVI-D] / [SLOT]/ [PC]■ [Sound output]Set the terminal to output audio.[Off] / [Upper/Left] / [Upper/Right] / [Lower/Left] /[Lower/Right] / [AUDIO IN1] / [AUIDIO IN2]2-2 [Picture in picture] detailed settings■ [Sub picture location]Set the position of the sub screen.[Upper/Left] / [Upper/Right] / [Lower/Left] / [Lower/Right]■ [Input(Main)] to [Input(Sub)]Set the input to display on the screen.[HDMI1] / [HDMI2] / [DisplayPort] / [DVI-D] / [SLOT]/ [PC]■ [Sound output]Set the terminal to output audio.[Off] / [Main] / [Sub] / [AUDIO IN1] / [AUIDIO IN2]2-3 [Picture by picture] detailed settings■ [Picture location]Set the display position of the screen.[Upper/Lower] / [Left/Right]■ [Input(Upper)], [Input(Lower)] or[Input(Left)], [Input(Right)]Set the input to display on the screen.[HDMI1] / [HDMI2] / [DisplayPort] / [DVI-D] / [SLOT]/ [PC]■ [Sound output]Set the terminal to output audio.[Off] / [Upper] / [Lower] (or [Left] / [Right]) /[AUDIO IN1] / [AUIDIO IN2]Note● The multi input display does not support interlacesignal.3. [Screen type]: [Multi screen display]1 to 10 displays can be aligned in horizontal directionand vertical direction respectively, and those displaysare regarded as one group. The enlarged image isshown on the combined display.[Multi display settings] - submenu screen([Multi screen display])00Multi display settingsMulti screen displayHorizontal scaleBezel H adjustmentVertical scaleBezel V adjustmentLocationOff22A1Screen type Multi screen displayMulti input display OffNote● The settings are memorised separately for eachinput terminal.● When [Multi screen display] is set to [Off], adjustto the same angle of view for [Position] (see page42). Then, set [Multi screen display] to [On]. Again,make fine adjustment of the angle of view for[Position].● The [Position] menu can be adjusted in the multiscreen display status.● In multi screen setup, the aspect is set to [Full].● For USB input, [Horizontal scale] and [Verticalscale] can be set only with the followingcombinations.1 × 2, 1 × 3, 1 × 4, 2 × 1, 2 × 2, 3 × 1, 4 × 1■ [Horizontal scale]Set the horizontal scale in the multi screen display.1 to 10■ [Vertical scale]Set the vertical scale in the multi screen display.1 to 10Example:[Horizontal scale] [5] and [Vertical scale] [5] is set inthe multi screen display